Symmons SLS-3610-STN Installationsanleitung PDF herunterladen (Seite 4)

Installation

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800)796-6667 ■ Fax: (800)961-9621

8) Insert pivot rod (T) into drain

body (Q) against inner seat (R).

Install outer seat (S) against pivot

ball and secure assembly by

tightening retaining nut (U).

Note: Pivot rod passes under

stopper.

9) Insert lift rod (J) into back of

faucet body (E). From below,

attach clevis strap (W) to lift

rod (J). Tighten thumb screw to

secure.

10) With stopper in closed location,

insert pivot rod (T) into clevis

strap (W). Secure with spring

clip (V).

11) To adjust stopper, select

another hole in clevis strap or

loosen thumb screw to slightly

raise or lower lift rod.

12) Attach drain body to drain trap.

Care and Cleaning

1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse

with water.

Troubleshooting Chart

Problem Cause Solution

Finish is spotting. Elements in water supply may cause

water staining on nish.

Clean nished trim area with a soft

cloth using mild soap and water or a

non-abrasive cleaner and then

quickly rinse with water.

Faucet is leaking from handle

or faucet body.

Cartridge o-rings are worn or foreign

matter (dirt, chips) is lodged between

cartridge and o-rings.

Remove cartridge and inspect for

foreign matter. Replace cartridge

if necessary.

Faucet no longer maintains desired

temperature.

Hard water deposits inside of

cartridge is preventing accurate mix

of hot and cold water.

Soak cartridge in white vinegar for

1 hour to breakdown hard water

deposits, then rinse with water.

Replace cartridge if necessary.

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Symmons SLS-3610-STN Installationsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sanitärkeramik Symmons SLS-3610-STN